Description

Bigger. Badder. BOLDER. Take your SXS to the edge with High Lifter’s 8″ Big Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 20 years perfecting the ultimate lift kit. The product? The Big Lift Kit is even easier to install with a bolt-on application that consistently measures truer over competitor products.
Each lift kit comes with four Outlaw RCV Axles or four Outlaw DHT XL Axles that are custom tuned for use with the 8” High Lifter Lift Kit.
Outlaw RCV Axle:
The Outlaw RCV axles are proudly built and assembled in the USA. Assembled by High Lifter and Manufactured by RCV Performance, the makers of high performance drive line products.
The Outlaw RCV uses the RCV Performances patented cage
Sliding bars on both ends for increased angle capability
Bars, housings, cages, and races made of high strength alloy steel
Well established and proven design
Outlaw DHT XL Axle:
Dual heat treatments on the housings to improve toughness against shock loads without compromising bearing surfaces and long term life
Oversized CV joint housings to increase strength
Housings and bars made from 4340 Chromoly steel
Puncture-resistant boots which are durable in high and low temperature climates
Molybdenum disulfide, anti-oxidation, rustproof, and high-performance
This 8″ lift kit package includes the following components:
Heavy duty laser cut rear upper lift/shock relocation brackets
Four custom heavy duty Max Clearance Control Arms crafted from 1 1/4″x.120 wall DOM tubing, heavy duty support gussets, and shock mounts
Full set of custom heavy duty Max Clearance Radius Bars with Spherical Bearings
Front and rear heavy duty High Lifter Springs
Four Outlaw RCV or DHT XL Axles
Additional brake line
Steering stops
All required hardware and brackets
Detailed instructions with step-by-step photos
Tire Fitment:
Up to 38.5″
Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.

Note: All Outlaw RCV Axles MUST be registered with High Lifter within 30 days of purchase for warranty to be valid. Customer must register the Outlaw RCV Axles by sending the completed Axle Warranty Registration Card included in each axle box along with a copy of the original sales receipt to High Lifter.
Note: This kit uses 12mm bolts to secure the rear radius bars to the frame and hub. In 2017 Polaris used 10mm and 12mm bolts. Polaris does not give a clear change over date for changing from 10mm to 12mm bolts. Before purchasing, verify what bolts are used from the factory to secure the rear radius bars to the frame and hub. This kit does not fit units that have 10 mm factory bolts!
Note: High Lifter strongly recommends pairing this big lift kit with a High Lifter Frame Stiffener Kit. Reinforce your frame to save yourself from a potentially expensive repair!